Anti-shatter safety film for homes, shops, and commercial glass.
Safety film helps hold broken glass fragments together after impact, reducing the risk of loose shards. Discreet, professionally fitted, and available for most existing glazing.
The challenge
When glass breaks, loose shards cause injury.
Patio doors, low-level glazing, shopfronts, school and gym windows — vulnerable glass is everywhere. Standard float glass, when broken, creates dangerous loose shards that cause serious injury. Many older buildings have glazing that does not meet current safety standards.
The solution
Safety film helps hold fragments in place after impact.
Anti-shatter safety film is applied to the inside face of existing glass. If the glass breaks, the film helps hold the fragments together rather than scattering as loose shards. This can reduce injury risk significantly. Suitable certified films can help upgrade existing glass performance when installed correctly.
Important note
Anti-shatter safety film helps hold broken glass fragments together after impact and can reduce the risk of loose shards. It does not prevent glass from breaking. Final suitability depends on glass type, film specification, and installation method. The Glass Film Company confirms glass compatibility before installation.
Common uses
This service suits a wide range of residential and commercial applications across Dublin.
Patio and French doors
Low-level glass at risk of accidental impact — common in homes with young children.
Sidelights and entrance panels
Common contact zones in homes and offices where accidental glass contact occurs.
Shopfronts and retail windows
Exposed glazing in busy areas where smash-and-grab risk or accidental impact is a concern.
Schools, gyms, and sports halls
High-impact environments with low-level glazing that may not meet current safety standards.
Offices with large glass panels
Internal and perimeter glazing where a glass failure would create serious risk.
Older properties with non-safety glass
A practical way to upgrade existing glazing performance without full glass replacement.
Who is this for?
Residential
Suitable for homes where low-level glazing in patio doors, doors with glass panels, or sidelights presents an injury risk — particularly in households with young children or elderly residents.
Commercial
Commonly specified in schools, gyms, offices, retail units, and licensed premises where vulnerable glazing needs to be upgraded without the cost or disruption of full glass replacement.
Indicative pricing
Typical estimate ranges depend on film type, glass size, access, quantity, and installation conditions. Use the estimate tool for a rough guide — no commitment required.
- Safety film is priced by glass area, access requirements, and film specification.
- Thicker certified films carry a higher material cost than standard clear safety film.
- Most fitted jobs are completed in a single visit with minimal disruption.
- Use the estimate tool for a rough guide, then send photos of the glass and frame for a confirmed quote.
How it works
From rough measurements to confirmed installation in a few clear steps.
- 01
Measure your glass
Add rough pane sizes, quantity and where the glass is located.
- 02
Get an estimated range
See a guide price range before spending time on a full enquiry.
- 03
Upload photos
Send wide photos and close-ups so the quote can be checked properly.
- 04
Receive exact quote
The Glass Film Company reviews the details and confirms the right film or graphics.
- 05
Supply-only or fitted
Choose DIY cut-to-size film or a professionally fitted installation.
What to expect
- Applied to existing glass — no glass replacement needed
- Clear or lightly tinted — discreet finish options
- Helps hold broken fragments together after impact
- Glass compatibility confirmed before installation
Frequently asked questions
Common questions about this service — click any question to read the answer.
Does safety film stop glass breaking?
No. Glass can still break under sufficient impact. Anti-shatter safety film helps hold the broken fragments together rather than scattering as loose shards. This can reduce injury risk, but the glass itself can still break.
Is safety film burglar proof?
No. Safety film is not burglar proof. It is designed to hold broken glass fragments together after impact, not to prevent entry. It may delay a smash-and-grab attempt by increasing the time needed to clear a broken pane, but it should not be relied upon as a security barrier.
What does 2B2 mean in simple terms?
2B2 refers to a performance classification in the European glass safety standard EN 12600. It describes how glass behaves when broken — a 2B2 rating means the glass breaks in a pattern that meets a defined safety level rather than creating large sharp shards. Certain certified safety films, when correctly specified and installed, can help existing glass achieve a similar level of performance. Final suitability requires confirmation by a qualified installer.
Can safety film be fitted to existing glass?
Yes. Safety film is applied to the inside surface of existing glass without replacing it. It is compatible with most standard float and toughened glass, though final suitability is confirmed before installation.
Do you need photos before quoting?
Yes. Photos help confirm glass type, frame condition, and access, which affect the film specification and installation time. Use the quote form to upload images with your rough measurements.
Related services
View project gallery →The Glass Film Company also offers these closely related services.
Privacy Window Film
Reduce overlooking and create calm, private glass without blocking natural light.
From EUR 95 supplied and fitted
Solar Window Film
Improve comfort in bright rooms with heat, glare, and UV-reducing film.
From EUR 110 supplied and fitted
Shopfront Graphics
Polished vinyl lettering, window graphics, opening hours, promotional decals, and privacy graphics.
Available soon